贝斯通检测
专业检测认证

灯具EMC测试流程和标准

  灯具EMC测试流程和标准。

  灯具/照明产品的电磁兼容EMC包括电磁干扰EMI(Electromagnetic Interference)和电磁抗扰EMS(Electromagnetic Interference Susceptibility)

  当今绝大多数电气照明产品都包含电子控制装置(变压器、电源、电子镇流器或驱动器,连接到低压电源),这些电子控制装置会在电路中会产生磁场,可能会在其周围的其他设备中引起电磁干扰,即EMI。比如在LED照明方面常见的EMC问题:干扰家里的其他电子设备,特别是视听设备,如电视、广播、电话通讯等。

  另一方面,照明产品的使用环境中也会有来自各方面的电磁干扰,若产品自身的抗扰度不够,就会受外界的干扰造成产品运行不稳定,甚至损坏。此处所讲到的电磁抗扰度便是EMS。欧盟对这些照明产品实施了EMC监管,要求这些产品符合适用的EMC标准并加贴CE标志,才可在欧洲市场上销售。

  EMC认证适用的灯具/照明产品包括:

  灯管,球泡灯,隧道灯,工矿灯,路灯,日光灯,台灯,落地灯,吸顶灯,壁灯,灯罩,天花板射灯,橱柜照明灯,灯条,手电筒等。

  灯具类产品EMC标准/测试方法汇总:

  EN/IEC 5515:Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  EN/IEC 1547:Equipment for general lighting purposes – EMC immunity requirements 普通电气照明和类似设备的电磁兼容抗扰度要求

  EN/IEC 1-3-2:Electromagnetic compatibility (EMC) Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 1 A per phase) 低压电气及电子设备发出的谐波电流限值(单项输入电流不大于1A)

  EN/IEC 1-3-3:Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 1 A per phase and not subject to conditional connection 输入电流不大于1A的低压供电系统电压波动和闪烁测试

  EN/IEC 1-4-2:Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test ESD静电放电抗扰

  EN/IEC 1-4-3:Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test 辐射,射频,电磁场抗扰度

  EN/IEC 1-4-4:Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test ETF电瞬变脉冲群抗扰度

  EN/IEC 1-4-5:Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test 浪涌抗扰度

  EN/IEC 1-4-:Electromagnetic compatibility (EMC) – Part 4-: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields 射频场引起的传导干扰的抗扰度

  EN/IEC 1-4-11:Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 1 A per phase 电压暂降,短时中断和电压变化抗扰度

  CISPR 15:Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  CFR title 47 part 15:Radio Frequency Devices 无线电频率设备

  ICES-5:Lighting Equipment 照明设备

  AS/NZS CISPR 15:Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  GB/T 17743:Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  GB 1725.1:Electromagnetic compatibility – Limits – Limits for harmonic current emissions (equipment input current 1 A per phase) 电磁兼容性 – 限制 – 谐波电流排放的限制(设备输入电流每相1A)。

  KS C 9815: 219:Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  KS C 9547: 22:Equipment for general lighting purposes – EMC immunity requirements 普通电气照明和类似设备的电磁兼容抗扰度要求

  J5515-1(H29):Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment 电气照明和类似设备的无线电骚扰限值和测试方法

  IS 147:Electromagnetic compatibility 印度电磁兼容标准及测试方法

  GR-189-CORE:Electromagnetic Compatibility and Electrical Safety – Generic Criteria for Network Telecommunications Equipment电磁兼容性和电气安全–网络电信设备的通用标准

  EMC测试步骤:

  1.试验大纲和测试细则

  2.确定所依据的标准

  3、交换试验接口信息

  4.检查测量仪器

  5、开始分项测试

  、出具测试报告

赞(0) 打赏
未经允许不得转载:CE认证 » 灯具EMC测试流程和标准
分享到: 更多 (0)

评论 抢沙发

评论前必须登录!

 

贝斯通检测 专业认证 诚挚服务

联系我们联系我们

觉得文章有用就打赏一下文章作者

支付宝扫一扫打赏

微信扫一扫打赏